1988 Mazda B2200 "oil change light 3" Questions

Ad

Oil light flickers on at idle and when stopping. Oil level is correct. Engine temp OK. Changed the oil to 10 w 40 but light still flickers. First thing to do is check for wires that may be chaffed ...

Ad

...oil pump housing to go by. On the camshaft the pointer will be at 12 oclock also. Use the O on the camshaft to the top at mark. Be sure to look at the dist. roter to make sure that it is pointing at ...

Ad

Question about Mazda B2200

4 Answers

...change oil for your specific year car. oil light? or Change Oil LIght? Big difference. oil light check oil level, oil filter, dont drive have it checked ASAP. Change oil light......turn key on, ...

Change Oil light stays on after oil change. Change oil light won't go out after oil change. Turn the key to the on position(do not start the engine) Pump the gas pedal 3 times within 5 seconds. The ...

...oil change when the oil change light came on. I got the car back and the light was still on. I asked the oil changing place to reset it and they said they did but it was still on. Later I had the ...

oil change at a jiffy lube and they did not know how to reset the light. turn key to the acc position without the engine running and depress the gas pedal all the way down 3 times this should turn off

Question about Mazda B2200

1 Answer

...oil change! If you already changed your oil you are going to need to reset the change oil light. To reset the Change Oil light you will need to turn the ignition key to the open position then back to ...

...oil change light in a 2003 olds alero turn key on (dont start engine) floor gas pedal 3 times 1,2,3. turn key off, now start engine it should go off, if not try it again. Should be listed in your ...

...change oil light on 01 Buick Century How to Reset the GM Oil Life System After changing the engine oil, the system must be reset. 1. With the engine off, turn the ignition key to RUN. 2. Fully push ...

...oil change light is still on, but I got my oil change and the light is still on. How do you reset the oil change light? turn ignition switch to on or run position with engine off press accelerator ...

Not finding what you are looking for?
Cars & Trucks Logo

546 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 Mazda 6
2004 Mazda 6

738 Questions

2000 Mazda MPV
2000 Mazda MPV

692 Questions

1999 Mazda 626
1999 Mazda 626

544 Questions

2001 Mazda Tribute
2001 Mazda Tribute

609 Questions

2002 Mazda Tribute
2002 Mazda Tribute

615 Questions

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...