change spark plugs in a 1989 mazda 2200 i think anyone that can change the spark plugs in a car needs a pat on the back.well done.adrian,,,,,,
check engine light stays on Just found this on justanswer.com. " "There are three connectors coming out of the main wire harness near where it comes through the firewall under the driver's side of the
...while parked but when driving around 30/40 miles an hour it loses power and starts sputtering changed fuel filter and wires plugs cap fuel pump does make buzzing sound could it be fuel pump or ...
b2200 jerks and hesitates Mazda 1988 b2200 pickup, runs fine at idle, when driving, it's jerking and hesitates. when I accelerate, it hesitates. I don't know how to describe this but it feels
Oil light flickers on at idle and when stopping. Oil level is correct. Engine temp OK. Changed the oil to 10 w 40 but light still flickers. First thing to do is check for wires that may be chaffed ...
1991 mazda b2200- timing belt changed need help in alligning the timing marks after changing the timing belt. If the crank is set at TDC what should the cam pulley mark be at 0-1-2-3? The keyway and ...
does not have any spark i have changed coil distributer router and plug leads still no spark Is the starter executing/engaging? Battery's not dead?
...plugs and also suggested I change my distributor cap.Could it possibly be my fuel line?Any suggestions would be appreciated.Thx I would try spark plugs and wires. If it was a fuel line you would see ...
...plugs, wires, oil change and lube the ball joints anything else sold by the sales dude was a waste of money and apparently damaging to the truck as it was running before you removed the coil.. which ...
Question about Mazda B2200
i changed my plugs and wires but truuck will not start but will turn over when it turns over it backfires Wrong firing order makes it backfire. Here's the firing order from Hayne's manual. (This is ...
546 questions posted
Usually answered in minutes!
738 Questions
692 Questions
544 Questions
609 Questions
615 Questions