1988 Mazda B2200 "antifreeze coolant getting transmission" Questions

Ad

...antifreeze overflowing from cooliant recovery tank if you have trany fluid in the radator than you need to replace tthe radator, and have the coolant system flushed. and make sure there is no coolant ...

Ad

...antifreeze in the transmission. The pressure in the tranny cooler will not let any coolant get in. If it was leaking you would have tranny fluid in the radiator. You may have some freeze plugs that ...

Ad

antifreeze tank and fill it with coolant. If there is a crack in the tank you will see it or the results of it. Replace the antifreeze tank - these things get cracked when people put water in the tank

Question about Mazda B2200

1 Answer

...SHOULD BE AT HOT MARK FOR HOT ENGINE AND WHEN ENGINE COLD COOLANT LEVEL SHOULD BE AT THE COLD MARK.IF POUR ANTIFREEZE IN THE RADIATOR COOLANT LEVEL SHOULD BE AT TOP OF RADIATOR BELOW PRESSURE

antifreeze), no water in oil, all fluid levels are good including oil, car does NOT overheat at all.. maintains a steady temp, no smells from heat vents, and no funny sounds or anything from under the

Question about Mazda B2200

12 Answers

...coolant looks like choclate milk you most likley have a crack in the tranny oil cooling reservoir. my car is a pieace of **** and i got gasoline in my oil when water antifreeze and oil mixes the ...

...antifreeze and no cross over point in this style although the seal was bad and there was oil in it. coolant is now the consistency of pudding, the level never goes down but it has been leaking a ...

...coolant system in the least, however antifreeze in the trans. fluid will harm the automatic transmission get the tranny flushed as soon as possible , Change out the thermostat then refill radiator ...

Question about Mazda B2200

4 Answers

...coolant into the tranny fluid lines, IF there was a hole, crack, corrosion, etc. in the tranny cooler. Best fix would be to not drive the car, replace or repair the radiator ( I would replace). Best ...

antifreeze. What could cause this to happen and how can you fix it? The heat exchanger in the rad header on the bottom is shot. You need a new rad, flush the coolant, change the tranny oil and filter,

Not finding what you are looking for?
Cars & Trucks Logo

546 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 Mazda 6
2004 Mazda 6

738 Questions

2000 Mazda MPV
2000 Mazda MPV

692 Questions

1999 Mazda 626
1999 Mazda 626

544 Questions

2001 Mazda Tribute
2001 Mazda Tribute

609 Questions

2002 Mazda Tribute
2002 Mazda Tribute

615 Questions

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...