1998 GMC Sierra "hood latch" Questions

...hood latch. If the hood needs to move over an inch to line up with the hood latch then it must also need to move over an inch to line up with the fenders. If I understand it correctly then you may ...

hood wont pop see if the cable is working or have someone press down or bump the hood while you try an open it,the hood only consists of your cable and latch so it has to be one of them. TIM

I NEED A VACUUM HOSE Diagram for 1992 gmc 5.7 truck Look on the radiator schroud where the hood latch is and look to right.of latch.

...hood latch not working correctly Does it look like the release cable might be stuck. Check to see if there is extra cable at the release mechanism inside the truck.You may need to replace the release ...

hood near the latch that will show you the correct routing. Second, if the new pump and or pulley ( if reused) is not aligned properly, the belt will "walk" off the pulley very quickly. Use a straight

Hood latch won't latch when closing Hood latch won't latch when closing Raise hood,have some one go pull hood latch and you look at latch and see if it releases,if it doesn't then ...

...hood latch from under front of car, underneath hood latch. good-luck!! Hi. Usually hoods came with safety latch that will prevent your hood from opening if hood release fails while drivng. Try to ...

...hood latch sometimes the hood adjustment for the latch is too tight, pull the hood latch, go out to the hood and press down on it at the latch location, push hard and release quickly, then adjust the ...

someone push down on hood while you pull hood latch, with latch pulled out hold it while helper pulls up on hood. If that does not work, try pulling up and down on hood with latch pulled open and held

...hood latch assembly, hood latch doesn't lock in place, all the the way down flush with bumper.where to adjust? Loosen the hood latch mounting bolts- you should then be able to move the latch assembly ...