1998 GMC Sierra "hazard turn" Questions

turn on my hazard lights, I don't have hazard lights, no clicking. I am trying to find out if I have power coming from the hazard light switch. sure, IN USA. the FSM shows, that (factor service manual

1998 gmc sierra hazard relay location Turn/Hazard Flasher Mounted to the convenience center, under the left side of the IP, to the left side of the steering column, on the bulkhead

...is located: Front seating area, driver side, under dash, driver side of steering column, mounted in relay bracket Application: Hazard flasher Turn SIgnal flasher is one independent unit. Hope

...turn signals and hazard flashers, Unless the replacement module is bad, then there are only two possibilities: Both the Left and Right Turn Fuses in the left instrument panel fuse block are blown, or ...

turn signals do not work but hazards do. is this the turn signal switch? they each haave there own relay is and easy fix just turn on flashers and feel the relays to find which is working and replace ...

...turn signal and hazard flasher. If everything checks out , your problem is probably in your turn signal switch assembly located in your steering column. have you checked for voltage at tailight ...

...flash. Does not happen when right turn is activated. also checked hazzards, they work fine. it sounds like have the left wire hooked up to brake and hazard wire has it always been that way r just ...

...turn signals or hazard lights. Already changed the multi function switch. What to look for next? Already changed the multi function switch and now the wipers and cruise control work but still no turn ...

...have you checked the fuse ? are all turn lights not working or just the rear? If all of the fuses are ok try operating the hazard lights switch a few times, (maybe intermittent or just plain

...turn signal or Hazard switch is turned on, the current through the flasher causes it open and close its internal contact in the 12 V line, thereby turning the signal lights on and off. So, for the ...