1998 GMC Sierra "good brake pedal" Questions

Ad

...brake pump needs to be replaced now before replacing make sure your pads are installed correctly because if there not this to can cause this problem good luck. if this information has been useful ...

Ad

...switch or just a bad brake pedal return spring. Next time you are in the vehicle....pull the brake pedal up with your hand or foot to see if the light goes off. this may solve the problem....good ...

Ad

Question about GMC Sierra

1 Answer

...from the brake switch and then "unscrew" the switch and replace with new one. Connect the pigtail. Adjust the switch so that the brake lights activate with a touch of the brake pedal. Good

Question about GMC Sierra

1 Answer

brake pedal and one at the brakes have the person at the pedal push the pedal and hold it, the person at the brakes opens the line then closes it with the other person still pushing. once it is closed

Question about GMC Sierra

1 Answer

...switch. the brake wire is white at the switch. hook up your multimeter to the white wire. then depress the pedal. if you have 12 volts, the switch is good. if not, remove and replace the ...

...brake pedal switch good ,turn signal switch good,light switch good tail & turn lights work at rear & front correctly check the relays and connections at the tail lights and under the truck, ...

brake lights work then. If they do then the switch is faulty. If not then it is a wiring issue. check your bulbs and make sure your ground wire is still connected. Also check your fuse in the fuse box

Question about GMC Sierra

1 Answer

...good than check the brake switch located under the drivers side of the dash and near the brake pedal lever. There should be power in all the time and power out when the pedal is pressed. If that ...

Question about GMC Sierra

2 Answers

depress the pedal, this in turn operates the electric feed to the brake lights, this switch may be worn, or faulty...an easy but a little awkward fix Check trailer wiring, That's a good place to start

...brake pedal 4-5 times, then press and hold while you open the bleed valve and close when fluid streams out. start with the rear wheel (if 4wheel disc brakes) then move to the front. 3. Replace Master ...

Not finding what you are looking for?
1998 GMC Sierra Logo

1,551 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1997 GMC Sierra
1997 GMC Sierra

847 Questions

2000 GMC Sierra
2000 GMC Sierra

676 Questions

1999 GMC Sierra
1999 GMC Sierra

601 Questions

1994 GMC Sierra
1994 GMC Sierra

604 Questions

1996 GMC Sierra
1996 GMC Sierra

457 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...