1997 GMC Sierra "transfer case locked neutral" Questions

Question about GMC Sierra

I have an 05 GMC Sierra and for the last few years ive had 4wd issues it all started when i was driving out at a farm and hit a hard bump the service 4wd light came on for a minut then went back off a

...Transfer case neutral indicator circuit malfunction B2725-Mode switch circuit malfunction C0306-Motor A/B circuit malfunction C0321-Transfer case lock circuit malfunction C0327-Encoder circuit ...

Question about GMC Sierra

1 Answer

My 1997 GMC Sierra lights for 4hi and 4lo blink when i push the 4hi button and then goes back into 2hi. but when i push 4lo it locks in and works fine. I tried changing the 4wd motor on the transfer c

...TRANSFER CASE MOTOR IS ONLY FOR 4WD LOW. That would have never been the problem as soon as you confirmed it shifted into 4wd Low. 2wd and 4 Hi work off of vacuum. You may have one or two issues. A ...

Question about GMC Sierra

2 Answers

Have a gmc 2005 sierra the 4x4 doesn't work. when

transfer case,but never engage and ligth goes back to 2x2 again.? Not good! there is a sensor in your transfer case that senses that you are now in four wheel drive if your transfer case does not lock

Question about Cars & Trucks

2 Answers

My new 2007 H3 drives in 4x4 all the time I placed the transfer case in N (neutral) and the vehicle will not engage to drive or reverse. Does placing it in neutral put the entire drive in neutral.

transfer case in N (neutral) and the vehicle will not engage to drive or reverse. Does placing it in neutral put the entire drive in neutral. Does placing it in neutral put the entire drive in neutral

Question about GMC Sierra

2 Answers

Can a 1998 4x4 S-10 blazer be dinghy towed?

...Transfer Case in Neutral position. Shifting into NEUTRAL To shift the transfer case to NEUTRAL do the following: Make sure the vehicle is parked so that it will not roll. Set the parking brake. Start ...

Question about GMC Sierra

2 Answers

Is it right for your front drive shaft to turn by

...transfer case is not engaged. This is most likely because either the hubs are not locked or the transfer case is in neutral. This is a good thing if your transfer case is in 2 wheel drive. With ...

Question about GMC Sierra

1 Answer

Can't transfer to 4L or neutral mode

...transfer case from 2wd to 4wd. It shifts to 4L without any problem, but it doesn't move anywhere else. Can't figure out what might be a problem. Transfer cases can be quirky. I've got a 91 Wrangler, ...

Question about GMC Sierra

1 Answer

LOOKING FOR A NEUTRAL TOW KIT FORD EXPLORER V8

...transfer case is in neutral. I installed my own LED and had the dealership download the program. This is for 2001 - 2005. The tow indicator light plugs into the small green connector under the ...

Question about GMC Sierra

2 Answers

HOW TO USE 4 WHEEL 1980 CHEVY K20 PICKUP

...transfer case in low,,u have to put truck in ,,neutral,,first,, 1980 has part time 4 wheel drive(np 205) transfer case only! These instructions would be a applicable to np203 equipped full time 4 ...

Question about GMC Sierra

2 Answers

I have a 97 chevy

...transfer case could be locked up. Try pulling the shifter motor (servo) off of the transfer case and manually shifting the vehicle into 4x4. Make sure to block the wheels as it will roll if you shift ...