1997 GMC Sierra "inner tie rod bushings" Questions

tie rod ends. Don't overgrease any of them, they only need one or two strokes of the gun. I think that is all you have. Some cars have a fitting on each end of the upper A-arm, but GM generally uses a

...inner tie rod? Not sure If I need a special tool to take off the nut. I used this website: http://www.allpar.com/fix/intrepid-steering.html It worked perfectly. To add to it, I used a tie rod puller ...

...inner tie rod ends first if it has those round bushings that always go bad disconect inner tie rod ends behind engine on top of steering rack then remove rack from wheel well replace those inner tie ...

...inner tie rod bushings basically wear away to a point sometimes they fall apart completely, dangerous to drive if thats the case. Easy fix for a trained technician. no diagram but theres not much to ...

...inner tie rod Does anyone know what size socket is needed to remove the bolt and also what the torque is? Thanks, Troy To Steering Gear Bolt 90 Nm (66 ft. lbs.) Jam Nut 75 Nm (55 ft. lbs.) NUMBER: ...

...the outer tie rod end nut that is connected to inner tie rod. Pull tie rod end back out of knuckle. Use pliers or vise grips to hold inner tie rod end while turning outer tie rod end to the

...Inner Tie Rod Bushings. The inner tie rods are up on the firewall behind the engine, have someone turn the steering wheel back and forth (just enough to feel all the play) and see if the rods are ...

...inner tie rod on a 2000 dodge intrepid I did this on a 2002 Intrepid, and found that it wasn't too complicated. I replaced the bushings only, rather than the tie rod end. You can get bushing ...

...inner tie rods. Inner tie rods rarely if ever need to be replaced in my experience: outer tie rod ends are far more common. Its not impossible so here's how. 1. remove the tie rod ends from the ...

...except from the tie rod itself when I mount the new parts? it depends if it is inner or outer tierod if it is inner i would get the bushings for it too Maybe a new rubber boot for end of steering ...