1997 GMC Jimmy "vehicle smells gas start morning" Questions

...gas and I even tried starting fluid..nothing. Its starts anytime after noon. ??? few possible problems come to mind but the first being leaking injectors to confirm... try pushing and holding the ...

...gas or when i first start engine in the morning better get it looked into by a good mechanic that can cause fires that kill you or others Ray has the best idea. But you can check. Look for any wet ...

smells funny otherwise car runs fine. but the other morning when i started it, the car was dogging out until i shut it off and started it again then it was fine. any suggestions as to what the problem

gas inside the vehicle i have to pump the gas pedal sometimes in the morning or it WILL NOT START ....common fuel leaks with the 4.3? A fuel hose may be leaking - look for it. If carbureted, the float

...vehicle..?..Are you sure it has fuel in it..A faulty fuel pump cause this problem..Also can make the float stick.Also If it has no fuel it can stick where it wants and make you think it has ...

...gas.I did notice there is some moisture comming out of the pipe.and know my car turns off. the best way to diagnose the check engine light is with a code reader.in order to know what code is causing ...

gas anymore as well. what it is doing now which. its been doing this for a few months, now I don't consider it not drivable less than a week later its now slow accelerating smuttering, and stalling no

...vehicle. It is a 2005 Grand AM SE. Can anyone suggest anything on this? I am not driving it due to afraid of raw gas smell. Your carbon canister may be saturated with fuel due to a clogged filter, ...

...vehicle, I get a loud knocking noise when trying to turn it over, and to top it all off there is gas leaking from the muffler. I do not know what I have done wrong, I have looked and looked at the ...

...smells like burnt plastic once it gets hot, but I can not see anything melted or burning under the hood.. The car was running fine the night before. I just recently had the Head machined and head ...