1997 GMC Jimmy "brake bleeding" Questions

Ad

...brake pedal goes to the floor and have no brakes at all????????????????????? Bench Bleed the M/C first, then do not let it run dry during system bleeding. Parts stores sell a kit that helps installed ...

Ad

...Brake bleeding Procedure 1. First, you have to depress pin location (see Image) Keep this pin block so it will not pop out during the bleeding otherwise air will stay trap inside the system. 2. Start ...

Ad

Question about GMC Jimmy

1 Answer

have a 2000 gmc jimmy diamond edition and i am trying to bleed the rear brakes after a complete brake line replace and i am not getting any pressure how do i bypass the anti lock brake system so i can

Question about GMC Jimmy

1 Answer

...brake bleeding procedure will quite adequately remove air from the hydraulic system. The major difference between the pressure and manual bleeding procedures is that the manual method takes more time ...

Question about GMC Jimmy

3 Answers

...brake vaccum booster, although that doesn't seem the problem. You first need to make sure your master cyl is bench bled. with a hose bleeder kit, you can bench bleed in-car. you should be able to ...

...brake pedal and listen for air escaping, or the pedal goes slowly to the floor, Do that after the master cylinder has been changed, at least that will be eliminated. When bleeding the system - there ...

How do I bleed the brakes after replacing a brake line? the wheel that the line you replaced is where you start. make sure the master cylinder doesn`t get low on brake fluid. crack open the bleed ...

...bleeding a brake, until the line is tightened, then release slowly to prevent air from getting into the fluid. You should of course get fluid at the master cylinder when you bleed it (or just replace ...

Question about GMC Jimmy

1 Answer

...to be pressed down to the floor Sounds like you have to bleed the brakes. Check that the brake fluid reservoir cap doesn't have a ripped or leaking gasket. I would recommend bleeding your

Question about GMC Jimmy

1 Answer

BRAKE MASTER! When ur bleeding the brakes, make sure ur engine is RUNNiNG. I f u haven't got any BLEEDiNG tools that sucks all the fluid in ur car, try Bleeding first the master, 2nd will be the front

Not finding what you are looking for?
1997 GMC Jimmy Logo

1,539 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 GMC Jimmy
2000 GMC Jimmy

1,363 Questions

1998 GMC Jimmy
1998 GMC Jimmy

1,127 Questions

1999 GMC Jimmy
1999 GMC Jimmy

1,104 Questions

2001 GMC Jimmy
2001 GMC Jimmy

838 Questions

1996 GMC Jimmy
1996 GMC Jimmy

768 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...