1997 GMC Jimmy "beams high work" Questions

...High beams not working amber lights work. checked all fuses, replaced relay, resurfaced ground and bolt behind passenger light underneath batter tray. Have taken relay out and jumped pin 30 to 86 and ...

...high beams work The low beams don't come on. Dash lights running lights and high beams all work fine. Looking for a switch or relay but don't know where to look There is a headlight ...

...high beams work, low beams do not ( brand new bulbs and interior switch ) Passenger reverse lamp inop... Driver side rear blinker/brake light stuck on... Fuse panel hard to read but all good fuses. ...

the same problem here a while back. try clicking on the high beam lever. mine went bad and was stuck in between high and low beam and would not come unstuck. and it caused the headlights not to work..

...beams? Replace the turn signal switch. All the exterior lights run threw it except the high brake light. There is a small plastic clip/switch in it that controls high and low setting. Because of heat ...

...High Beams are not working and I have checked the fuse what else could it be? Everything else is working Sounds like the combination switch is bad. The comination switch is for the turn signals and ...

...high beams aren't working either. the switch for the high beams (the same one that contains the windshield wiper controls and the turn signal controls) will not turn on the high beams or ...

head lights. both low beams don't work, but both high beams do check & replace bulbs as required. If bulbs ok test for switch operation and replace as required, retest

...high and low beams are stuck on dull and only get slightly brighter when I turn on high beam? Passenger side works fine. Check the earth connection, sounds like it has lost the earth on the off side ...

Driver side brights not working from short? Replaced my driver side high beam and the old one shorted out when replacing now my both my driver side headlights stay on really dull and get slightly ...