1994 GMC Sonoma "car engine locked" Questions

Question about GMC Sonoma

Yes, I had the Battery, and Starter checked they are New. I had added all new parts and Sensors under my hood including a Distributor. I checked my wires to the Starter they are all ok. I checked ever

...Distributor. I checked my wires to the Starter they are all ok. I checked everything that I know to check. I tried turning the engine by hand, but was unsuccessful. sounds like the engine is locked ...

Question about GMC Sonoma

1 Answer

I would like to change the existing differential

I would like to change the existing differential on my truck. Since it has no locking system when one wheel is spinning the other thoes not pull. So, I would like to replace it with the one which has ...

Question about GMC Sonoma

2 Answers

How to reset the check engine light

How to reset the check engine light You need an OBII scanner to reset engine light. Have scanned and pull codes to identify what triggered light. Any good shop or parts store can do it for you. you ...

Question about GMC Sonoma

1 Answer

My '94 Gmc Sonoma engine won't turn over when trying to start - Do this means my engine has lock up ?

...This problem came about after I replaced the Fuel Injectors which had going bad...gas did go into carburator area as I tried to start the truck. How can I fix this problem and get my truck back on ...

Question about GMC Sonoma

1 Answer

1994 sonoma fuel pump continues to run with engine off

1994 sonoma fuel pump continues to run with engine off with ignition off fuel pump is still powered and runs battery dead Replace the ignition Switch. Not the ignition lock cylinder.

Question about GMC Sonoma

1 Answer

Timing chain replacement

...engine bolt and the adjuster. To check the operation of the automatic chain adjuster, push the shoe inwards, if it becomes locked, the adjuster is working properly. The adjuster assembly must be ...

Question about GMC Sonoma

1 Answer

Code 72 antilock brake light on. engine does not

code 72 antilock brake light on. engine does not run correctly 72 Transmission code - Vehicle Speed Sensor (VSS) signal loss (4L60-E) This code is the result of a failed VSS module. This device is the

Question about GMC Sonoma

1 Answer

1999 GMC Sonoma. How do I bypass my security system if the wires are red and white orange and white and yellow.

...this? Want to bypass your vehicle security system? The short answer is you can't! All modern cars have alarms and immobilizers. There is a transponder in the key and a receiver around the ...

Question about GMC Sonoma

1 Answer

Why will 1999 gmc not start or even turn mtr. over

...cable, key switch, or the neutral safety switch. Even an accessory on the engine could have the engine locked up. Do you have power at the starter posts when the key switch is in the start position

Question about GMC Sonoma

1 Answer

Standard Brand ignition lock cylinder recodingMat for a 1999 Sonoma gmc. Installed a new ignition lock cylinder, my gears are locked. Do I need to recode it, to get the gears to unlock

...locked. Do I need to recode it, to get the gears to unlock There is a shifter unlock cable( not plug in or loose). The only thing with the cylinder replacement may be a relearn for security. This ...