1988 GMC S-15 "dash surround removal" Questions

dash. A guideline, or general order of parts removal would be: Remove lower panels beneath the dash.Remove the lower dash panel below the steering wheel.Remove the glove box.Remove the radio and bezel

...removal tool. 5 Remove the two screws behind the trim panel that surrounds the headlamp controls with a Phillips-head screwdriver. 6 Pull the dash panel that surrounds the stereo and covers the ...

...that hold the black plastic surround to the dash. They are located at the 4 corners. Remove the 4 other #2 phillips screws from the surround of the cluster body, unplug the electricals and

...surround. Remove 2 screws holding the glovebox to the centre console. Open glovebox. Remove 3 screws along the top front. Open the fuse box at back of glove box and push the fuse holder up off the ...

surround and all the pieces under the dash pad. They are all screwed on and are self explainatory. Also, remove the glovebox inner plactic piece. In order to get the big piece out that goes around the

I need to replace the cigarette lighter unit and don't know how to take the dash apart turn ignition switch to on ,shift trans into neutral,i'm assuming this is a baja,remove 2 screws under lid of ...

dash take it off should have few phillips screws to remove. then just pull the plastic surround trim off. you will have to pull pretty hard especially if its new. then the radio will come it there are

...dash surround to gain access to the core. Just go slow, take photos or video if necessary to remember how everything fits back in place. If you will search YouTube with the term "heater core ...

...surround for the gauges and dash center (radio area) need to be removed to gain access to remove the switch. Should be about 10 torx screws and then pull straight out. Should pull out easily when all ...

The automatic shift light on my 2004 camry is off...How do I fix it? is it in the console or dash,for console you need to remove the surrounds around T Bar to ghange the globe in there,if its in the ...