2003 GMC Yukon "wheel" Questions

I have a 2002 Yukon Denali and I was wanted to know, how do u change the bulb in the steering wheel? Steering Wheel Control Switch Assembly Replacement Removal ProcedureRemove the steering wheel. ...

...and pads 2 months ago and they still look good RAISE TRUCK SAFELY, SUPPORT WITH JACK STANDS GRAB WHEEL TOP AND BOTTOM.TRY SHAKING THE WHEEL IF WHEEL MOVES WHEN YOU GBAB IT TOP AND BOTTOM. YOU HAVE ...

Torque Setting for the Wheel Berring Nut Need to know the Torque setting for the Wheel Berring Is this a 4x4 or 2 wheel drive?If its 4x4 its 150flbs and 2 wheel drive its tightened by hand until slop ...

Is it possible to disconnect the chain in a 99 Yukon Transfer Case and still maintain Rear-Wheel drive. There's a rattle in the transfer case and I never use 4WD. If I can't, is there a gear or ...

1996 Yukon, 4x4, engaging 4 wheel drive The owner's manual is poorly written in this area so I am uncertain as to how I should proceed to engage the manual (on the floor) 4 wheel drive function. ...

2001 GMC Yukon 4 wheel drive problem Do you know of any common problems with the 4 wheel drive on these trucks? My Serivce 4 wheel drive light is on and the lights on my switch to engage the 4 wheel ...

won't go into 4 wheel drive and says "sevice 4 won't go into 4 wheel drive and says "sevice 4 wheel drive" happened last winter too when I really needed it. I have this problem too, from ...

hearing noises from the driver side front and rear wheels Hearing like a rubbing noises from the driver side front and rear wheels Jack up that side of the car and turn the wheels by hand to narrow ...

how would you know if you have 10in or 11in rear drums on a 96 yukon, with out removing the wheels? u can try crawling under truck and measureing backing plate but wont get accurate number why dont u ...

...your tire balance. If a tire is out of balance you'll notice the vibration at speeds above 50mph. 3.Wheel alignment. If the alignment is out, the tire will show uneven wear and can cause vibration ...