2003 GMC Yukon "replace front passenger axle seal" Questions

Ad

...front alxe seals are leaking. Oddly enough, had to replace the rear pinion diff seal on my 03 Sierra last week. W/r to the 05 Yukon (title is wrong, it is an 05), are these axle seals difficult to ...

Ad

...front differential and on the passenger side. When in 4wd mode, a switch on top of the transfer case conducts 12 volts out to the actuator. Wire #50 (brown) is the 12v feed, and it conducts to the ...

Ad

front differential. The shift fork engages a spline on the passenger side of the differential, and boom! you have 4WD. GM offered an upgrade to this actuator that is a motor instead of a heated device

Question about GMC Yukon

1 Answer

...front axle seals on my 1999 dodge 3500 4x4 need to be replaced. I am replacing the sealed bearing hubs and I wonder how big of a job it would be to switch out the axle seals inside the differential ...

...front differential is leaking out the driver side where the cv joint bolts onto it. How do I go about fixing that? I cannot see it, but I am guessing that you need to replace your axle seal. To do ...

...replace my inner axle on the passenger side of my 2002 Dodge Ram 4x4 4.7L. I lent my truck out and the C clip let go of the CV axle. The intermediate axle spline is stripped and I need to change it. ...

replacing left inner front axle seal,procedure axle to diff.seal and tools needed need more info which make of 4x4 or passenger front wheel drive

Question about GMC Cars & Trucks

1 Answer

...front axle. What needs to be done, is to remove the passenger side tube and axle. replace the seal, then place the washer onto the outer axle and put the housing onto the inner housing with the outer ...

...front axle. What is involved in replacing this seal? I have all tools needed, (spring compressor, ect). Should I replace the bushing when changing the seal? In most cases just replacing the seal will ...

...replace the seals, remove the front diff assembly. To remove the passenger side seal, I would suggest removing the tube assembly (5 bolts). This is due to a steel washer that goes on the end of the ...

Not finding what you are looking for?
Cars & Trucks Logo

635 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 GMC Yukon
1999 GMC Yukon

593 Questions

2004 GMC Yukon
2004 GMC Yukon

524 Questions

2001 GMC Yukon
2001 GMC Yukon

309 Questions

2007 GMC Yukon
2007 GMC Yukon

326 Questions

1996 GMC Yukon
1996 GMC Yukon

238 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...