2003 GMC Yukon "fender car loose" Questions

...moves up and down It could be. But first check to make sure the small wire coming from your ground cable to your fender is secure. If this cable is not attatched or loose, the headlights will

...Celica GTS? take the inner fender well out, unbolt the fender from the bumper, take the 2 bolts out under the car at the fender, lastly take all the bolts along the fender out, and gently pry it ...

...fender to frame of car. Remove bolts along seam hidden under hood. remove left front wheel and splash guard. remove more bolts in wheel well open left door, remove bolts in sill by door hinges. Take ...

...horn just stoped It's in betweenthe inner fender and the fender itself. You have to take the front of the inner fender loose to find it. Your fuse or horn relay may be bad. relays are

...for metal. Obviously the fender is not coming loose Your referring to trim-- I guess See a body shop for the correct professional adhesives,they can properly clean the area & re stick it ...

...loose inside fender area but cannot figure how to remove from fender hole at top. Please tell me correct procedure. If there is a slot in the "fender hole", it unscrews with a big screwdriver If not, ...

...all the fasteners that hold it where it belongs. With a car that old, the fender will be somewhat glued on by rust and grime. Use lots of penetrating oil to avoid stripping or breaking any

...loose from my fender and when I put it back on my windshield wipers turned on,need help ASAP thank you. You should disconnect the battery first as you appear to have a short. Look for a broken or ...

...loose the plastic fender well liner at the front and bottom of the fender well and it is inside and right beside the vapor canister above the horn. it has two long cable plugs on the bottom ...

fender 90% loose only to find you can't get some bolts loose without some help. My fenders were pretty rusty but luckily the structure underneath was good yet and I was able to just put on new fenders