2003 GMC Sierra 2500HD "rear stud" Questions

...Rear bolt) 129 ft-lbs x2 and (Knuckle Stud) 37 ft-lbs • Upper Control Arms - (Front and Rear bolt) 140 ft-lbs x2 and (Knuckle Stud) 37 ft-lbs • Inner Tie Rods - 81 ft-lbs • Outer Tie Rods - (Knuckle ...

03 gmc sierra fuse box Stud #1 is what?? Is the fuse for the compressor for rear shocks (autoride only)

...wheel lug studs. there should be one spot while turning rear wheel bearing that will allow one stud to be knocked out and new stud replaced BEFORE trying to remove the next stud... one at a ...

...rear wheel stud remove the wheel using a hammer and punch knock the broken stud out fit the new stud from behind use over size nuts as spacers fit the stud nut and apply tension using the hammer and ...

...stud on rear wheel. The last time I had the tires rotated the service tech cross threaded the lug nut. When changing a flat tire the stud sheared off. I need to replace the stud. I cannot figure out ...

...rear wheel stud i need to replace a wheel stud on the rear tire on my 2001 altima how do i go about doing that strip it down to your hub the hub holds the studs .it is a push pull fit .but an old nut ...

...rear stud on a 1999 Nissan Maxima You will need to remove the Rear Wheel, Brake Caliper, and Rotor to replace the Stud. Once those are removed, take a Hammer and hit the Wheel Stud from the front to ...

...rear wheel stud on '90 corolla drum brakes Have a 1990 Corolla SR5 and I'm swapping to 15x8" rims with 1/4" spacers in the rear. I am going to use '95 Land Cruiser wheel ...

...stud in rear wheel hub assembly. i need to know how to change the stud in the rear wheel hub assembly, and how do i go about taking it apart Remove tire and wheel, remove caliper and brake rotor. DO ...

...stud on the rear and in stuck studs are multi-splined and are pressed in. Use a good size punch and heavy hammer and drive the broken studs out the back. New studs can be pulled into place using a ...