2003 GMC Sierra 1500 "engine power" Questions

Ad

Question about GMC Sierra 1500

1 Answer

...engine off a few minutes later there is power at the gas pedel.If the vehicle is left idle in the off position for a while the check engine light comes off and the vehicle runs fine. check for codes ...

Ad

engine sounds normal Does the reduced engine power message come on? if it does check the electric connector at the throttle body. sometimes the wires get dirty or something. and usually the yellow one

Ad

...Engine Power--and it couldn't get up any speed--on a hill only 5-10 mph. Drove 50+ miles --top speed after light came on was 40 mph in order to get home--the further I drove the slower the speed ...

Question about GMC Sierra 1500

1 Answer

engine power is low I have a 2003 gmc pick up 2500 series. Engine power is low came on yesterday and I can not drive it. Any ideas of what i should do Fuel filter replacement may solve this,a tune up ...

Question about GMC Sierra 1500

1 Answer

engine light comes on the dash broad. and sometime after staring up the truck and when you step on the gas peddle there is no power. also when you are driving the truck you loos power when you step on

Engine POwer Sensor Located That is not what you are looking for. The issue is a decision by your engine management computer, based on some failure. What needs to happen is you pull the codes from the

Question about GMC Sierra 1500

1 Answer

...engine and lose the power and goes to slow its probably misfiring. Its a popping noise with a loss of power. -if its a newer truck: After multiple misfires the truck will go into safety mode, which ...

Question about GMC Sierra 1500

1 Answer

power since i bought it 1 yr. ago Is your "Check Engine" or "Service Engine" light on?  Scan your onboard computer system for possible fault codes even if your engine light is not on.  There

Question about GMC Sierra 1500

1 Answer

...Engine Power You need to have an OBII scan(fault scan) - to identify what sensor triggered computer (light) Reduced Engine Power = rig is in "Limp" mode. So you can drive it to get to repair

Question about GMC Sierra 1500

2 Answers

...engine power You need to have fault scan to identify what sensor triggered light. Reduced Engine power is telling you that it's in LIMP mode. there are a few things. engine overheating (or it thinks ...

Not finding what you are looking for?
Cars & Trucks Logo

967 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...