2003 GMC Sierra 1500 "car shake applying brakes" Questions

truck shimmies when brakes applied When I apply the brakes the truck shakes and I can feel pulsing in the brake pedal. Check your brake rotors,are they worn even and no worn marks.When replacing,do ...

...brakes are applied truck start to shake(idol rough) check for vacuum leaks in the system usually near the booser area somewhere.. do you feel your foot shaking at the brake pedal when brakes applied ...

...on a warped rotor as it goes around. When you apply the brakes the warped rotor causes the car to pulse or shake as the rotor goes around and applies the brake unevenly. You need a front brake

...shake while applying brakes and you can feel shake in steering wheel, front brakes and rotors need replacement.rotors are warped,if you replace front brake pads, it will return[shaking when you apply ...

...shake in the wheel. what can likely cause shaking of  steering.1)-if the tyre is not at equal guage.2)-15 xterra tyre rim is the best that came with the car.3)- may be one tyre is bigger ...

wheel or brake is making noise and shaking when applying brake 03 Town and country,wheel or brake is making noise and shaking when applying brake This could be one of 2 problems,a warped brake rotor ...

...ford mondeo car shakes when applying brakes or driving at more that 60km per hour shakes the whole body when applying brakes but replaced brake pads your front rotors are warped and need to be ...

...while applying the brakes, you have warped brake rotors, and they need to be replaced. A shake all of the time may also be another issue, as in tires out of round, out of balance, or bad tie rod

2006 ram that shakes in the front end when brakes applied and going around 40 mph. Ok at lower and higher speeds. Shaking is really bad when brakes applied at higher speeds. please help. more than ...

Car shake when brakes are applied. Why do my 2006 Chrysler Sebring shakes when the brakes are applied lightly but not when I push on them heavily? the brake rotors are warped...you just need to ...