1999 GMC Yukon Denali "not turn key" Questions

Ad

Question about GMC Yukon Denali

1 Answer

Yukon will not start with key Yukon will start with remote but after key is turned and my foot hits the brake the truck shuts off. It also will not start with key, there is power when key is turned ...

Ad

...key wont turn over engine You will have to reprogram your key. To do this: Try using old key turn from "Off to on" not starting car 7 times--remove and insert new key use same procedure--then try to ...

Ad

Question about GMC Yukon Denali

1 Answer

turn my key in my ignition. When I put my key in, the lights go on and the bell rings w/ my door open, but I can't turn my key. My steering wheel is not locked, I've jiggled my key, and even "wiggled"

Question about GMC Yukon Denali

1 Answer

...turn on key for ten second, turn key off un-hook positve side of battery, re conect turn key to on postion then try to start, it worked for me I have a 2003 denali yukon XL, the motor would fire then ...

Turn the key on and listen for the fuel pump to run for about 2 seconds. If you don't hear it run the may be a problem with the fuel pump relay or its cicuit. The extra cranking from the first and

Question about GMC Yukon Denali

1 Answer

...key into ignition3. Hold down the power UNLOCK button on the driver's door panel, continue to hold down     until instructed to release in step 9.4. Perform steps 5 through 8 in a ...

Question about GMC Yukon Denali

1 Answer

...key won't turn? Either way you have something broken, probably the ignition lock cylinder. The steering wheel has to be removed, There are quite a few special tools you have to have, you have to ...

turn the key to lock and test to make sure. I retyped this out of a manual but it does say press slowly I always did it fast from the time you turn that key on you have 5 seconds to pump that peadle 3

Question about GMC Yukon Denali

1 Answer

key will not turn or open any doors Got the right key? Is this a new buy for you? Does it work in ignition? If so then the ignition lock's been changed and you don't have the door key. Or dead

...key has been recognized). Of course you can simply turn the vehicle off as usual, just DON'T REMOVE THE KEY. Now, if you live in a high crime area (I don't), leaving the key in the ignition ...

Not finding what you are looking for?
Cars & Trucks Logo

296 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...