...of many trailer equip with fuses. if the stop and turning light works than you will have to retrace the running lights wire which has a short ground. 12 volts light tester will be good tools to
...fuse or running lights or indicator lamps. That is most likely the problem. also turn on just the running lights and check and see if the front running lights come on or not. I hope this helps please ...
Question about GMC Suburban
running lights work, I would crawl under rear and find light wires and use a test lamp to find the hot wire with only running lights on, then trace that wire to find the break. If front running lights
2000 Chevrolet Suburban fuse for license plate lights license plate bulbs? these run off of the park lights and that fuse is located in engine comprtment there is a box up around master cylinder area ...
...fuse controls dashboard lights My heater/ac/defogger wasnt working in the front, i went and replaced some fuses, got the heater working, and now my dashboard lights don't work? only the gear light ...
Question about GMC Suburban
...i fix my low beams, high beams, and daytime running lights on my 1999 GMC Suburban. None of them work. there is fuses in the fuse block under the hood and in the side of the dash, (HDL and Running
...beam then if test light on = bulb defect the blue one is for daytime running lights example : if 1 bulb is burn or open no daytime running lights p.s. you need to have 2 bulbs the same or it won't ...
Where is the fuse located for dask lights/running lights on a 1996 Chevy Suburban? Hi, check fuse 9 on the panel at the end of the dash board.
...running lights and the fuse keeps blowing every time we put a new fuse in. go back to where you spliced in the harness and check that you have not spliced a power wire to a ground wire ( only reason ...
336 questions posted
Usually answered in minutes!
921 Questions
273 Questions
225 Questions
157 Questions
68 Questions