1996 GMC Suburban "fuel relay" Questions

Ad

Question about GMC Suburban

2 Answers

...fuel pump relay but not at fuel pump plug key on engine off will have power to relay for 5 seconds then go out. test at relay plug in for ground comand. with relay removed. need test light off power ...

Ad

...fuel pump relay swith? The fuel pump should run a couple seconds when you turn the key on. The relay is on the firewall. There is also a fuel pump fuse (20 amp), on the firewall, make sure its good. ...

Ad

...fuel pump relay i have power to the hot side of the relay and i have changed the fuel pump, sending unit the oil pressure switch the fuel filter if power to relay and none to other side replace ...

...fuel pump itself. Bad relay switch? I assume the fuel pump fuse is good? The only time voltage will be sent to the fuel pump will be the first 2 to 3 seconds if the starter is not engaged. You will ...

Question about GMC Suburban

1 Answer

...Fuel Pump Relay. The Relay is located on the firewall just above the left-hand (even cyclinders) valve cover as viewed from the front of the car. There is also fuel pump test lead attached to the ...

fuel pump relay on 1989 Chevy Suburban 1500 4x4 Truck won't start. Know replacing fuel pump will be a b$*&# because it's in the tank. Where is the relay? Any options to bypass in-tank fuel pump with a

...the secondary fuel pump relay. look at the relay in the fuse box under the hood, there you should see a square fuse. (look for the one that says fuel pump) that might be youre prob. replace

...fuel pump itself. Bad relay switch? I have a 05 suburban that has 75 k miles on it. It started in 09 dec. driving it would spudder and then die. sometimes it starts right up. other times it takes a ...

...Fuel Pump Relay Circuit... There is an Oil pressure switch in this circuit that disallows the relay to complete the power supply to the fuel pump. It is for safety purposes , it senses engine oil ...

Question about GMC Suburban

1 Answer

...check is the fuel pump relay.By jumpering the relay terminals you should be able to power the pump to check it.  The relay gets a ground signal from the computer for 3 seconds during

Not finding what you are looking for?
Cars & Trucks Logo

336 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 GMC Suburban
1999 GMC Suburban

921 Questions

1995 GMC Suburban
1995 GMC Suburban

273 Questions

1994 GMC Suburban
1994 GMC Suburban

225 Questions

1993 GMC Suburban
1993 GMC Suburban

157 Questions

1992 GMC Suburban
1992 GMC Suburban

68 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...