...on my 99 olds alero. Any help? remove the 2 license lamp screws from outside,above the lic.plate then from insidethe trunk pull up the lic.lamp housing and replace the bulb.it should pull straight ...
replace the license plate light bulb-'99 cad DeVille Hello, Please follow the instructions below carefully to change the bulbs in the licence plate of your cad deville; 1.All you have to do is put a ...
...license plate light not working - have replaced the bulb No solution here :( but have you figured out the problem? I just came across the same on my 99 galant and cant figure out whats wrong. its not ...
license plate lights no power to sockets I replaced bulbs and new sockets, appears no power to wires, checked all fuses under rear seat too. thanks for any ideas Sounds like a wiring issue .rocks and ...
...license plate lights, and the reverse lights do not work properly. After the engine is started, the tail lights and the license plate lights don't work, when reverse is engaged and car backed up, the ...
...license plate lamp also fails to come on). The brake lights operate fine, as do the turn signals, hazard lights, and reverse lights. The first thought that came to mind was a blown fuse. When I ...
...license plate. A lot of work to replace a simple bulb. It should only take about 15 minutes if you have a deep-well socket - I don't think it would be possible with a wrench. I had that problem and I ...
license plate light burnt out how do i get to it to relpace it Shes a 99 300m most have 2 screws holding the covers on, just unscrew and pull cover off. there are 2 screws holding it in place.... be ...
license plate light not on and bulb is not blown. use a tester to tesr where light goes in, if no power still replace bulb insert [ where bulb screws in or plugs] 99 percent of the time just go to a ...
321 questions posted
Usually answered in minutes!
861 Questions
762 Questions
743 Questions
710 Questions
606 Questions