...spark plug boot puller Try to turn the wire before pulling on it to break the seal.I use an alignment shim from (early gm upper control arm) with a 1/4 inch bolt about 4 inches long fits around the ...
...spark plug socket and ratchet. Without the Removal Tool, you'll wind up in a mental institution. GM used to sell a similar tool but since Oldsmobile has passed on to the great beyond, you'll ...
...Gap For 2.4L-- Allow a gap of 1.27 mm (0.050 in). Tighten the spark plugs to 18 N·m (13 lb ft). Apply dielectric lubricant GM P/N 12345579 (Canadian P/N 1974984 or equivalent to the insulator
...GM 3.8 liter V6? Pulling by hand with a lot of force isn't getting it off the plug. I bout a spark plug wire removal tool from Sears, but it slips off the metal heat shield around the plug wire. Any ...
spark plug wires off 2003 yukon xl there is a GM special tool for removing these heat shields, without the tool you will destry the plug boot getting them off. The "method" for removing the plug wires
...spark plugs.Sorry to say but there is no secret way.If there were I would have found it buy now.I work at a G.M. dealership.Going back on is the easy part.Let me know if you have anymore ...
Question about Cars & Trucks
spark ? Hook up a fuel pressure gauge an test fuel pressure . You need to find out what's missing ? As far as the instrument cluster malfunction , GM had problems with instrument clusters from 2003 to
Question about Cars & Trucks
...spark, no start": videos. Probably have one for grand ams, or at least GM cars. Their ignition systems are all quite similar. Most often the problem is the crank position sensor or the ignition ...
...GM Ignition Coil for Spark and if it is strong enough The way to test this coil is to remove a spark plug wire and put a screw driver into the boot put the screw driver 1/4 inch away from bake metal ...
90 questions posted
Usually answered in minutes!
1,363 Questions
1,123 Questions
1,127 Questions
1,104 Questions
838 Questions