2007 GMC Sierra Classic "remove front headlight assembly" Questions

...front of the vehicle. Now slide the two tabs you originally pulled up to release the headlight assembly, back down into place making sure the "slots" at the bottom of sliding tabs catch the square ...

...Front left lens is cracked. Do I have to remove the grill to do this? No you do not need to remove the grill. If its the headlight, there should be 2 pins/rods that you would need to pull up and out ...

...Remove the front air deflector. Apply light pressure to the headlight lens to hold the headlight in place while disconnecting the retainers. Lift up the headlight retainers to release the housing. ...

...remove the driver's side headlight assembly from a 2001 Dodge Ram 1500 pickup truck. I've removed 3 screws from the front. The assembly is loose, but cannot be removed. On the upper grill side of the ...

...remove. The headlight assembly is now loose, but there is a pin snapped in a socket on the back of the assembly that still holds the assembly. Pull the headlight assembly hard and straight to the ...

...Remove 2, 7mm bolts of the front bumper that are now visible up near the outer edge of the headlight assembly.4. At this point I removed the bumper’s top edge start bolts and bottom edge 7mm bolts ...

...Remove the plastic front grill (uses a torx 15 driver - there are about 6 screws). This will expose the other two 10mm bolts on the headlight assembly. Remove the four 10mm bolts to remove the ...

...remove the front bumper. Five push clips along the hood line, remove the headlight wipers (if equipped), one T25 screw in the front of each fender well, then two 12mm bolts under the headlights (1 ...

...remove the front panel cover below the headlight to access the bottom screw of the headlight housing. There is also two screws on the top of the housing. Once you have remove the headlight, turn the ...

...front of the headlight assembly requiring replacement.  Look to the back of the defective headlight housing and you will see a black cover lid that requires a counterclockwise force to ...