...in drive.i have seen both bulbs blown.and bad sockets.remove the bulbs and test for voltage and grounds.then look at bulb terminals for burn marks. ohm test bulb.if open replace.hope this
...2nd or braking filament is burned out.It is a simple, low cost repair to remove the tail lamps and replace the bulbs with new ones before going after the more expensive, potentially complex causes. ...
just the light. The housing needs to be replaced as well. For some reason GMC built the housing around the light so you can't just replace the bulb. Best bet for a new housing with light would be eBay
...replace the pigtail wire harness for the lowbeam The pigtail clip for the lowbeam headlight bulb on passenger side is burned. Got a new part but not sure how to take the headlight apart in order to ...
...changed new bulbs and fuse is good Switch RELAY # 45 with #46, do you now have low beams? If so, replace the relay OR clean it by pushing it in and taking it out several time, which worked for me. ...
Both low beam headlights on my 05 GMC envoy do not Both low beam headlights on my 05 GMC Envoy do not work. I have replaced the bulbs but something else is wrong. any suggestions Check your headlamp ...
...lights do not come on when you push brake. The bulbs are fine This is the part you will need to replace. ...
I have a 2004 Envoy XL. The passenger side dim headlamp went out about 2 weeks ago and I replaced it. On Friday, I was leaving a meeting and I noticed my neither one of my headlamps were on, then I ...
...cluster with care when you remover it. if it was my car, i would replace all bulb. there are several different light bulbs for each indicator. one bulb has blown. replace bulb and problem
...replace headlight bulbs. How to access bulbs. Replacement bulbs are provided without replacing the entire headlight assembly. However when lifting the hood, what are the required steps to access the ...
203 questions posted
Usually answered in minutes!
111 Questions
16 Questions
262 Questions
178 Questions