fuel tank. Remove or disconnect the following: Fuel tank WARNING Do not handle the fuel sender assembly by the fuel pipes. The amount of leverage generated by handling the fuel pipes could damage tool
...fuel tank. Disconnect the fuel lines. Using the J 45722 or equivalent, remove the sending unit lock ring. Remove the sending unit and seal. Discard the seal. CAUTION Drain the fuel from the fuel ...
...lines and wires and disconnect them also if the tank is full of full remove the fuel hose the big one and use a smaller hose and sifone the gas out trust me that tank is gonna be heavy if its
Question about GMC Yukon Denali
...look for that unit .. 4 hrs and lots of swearing later. Ps. To get at it you have to drain the tank and drop it down...big job the fuel filter is a life time located on the fuel pump unit on gas ...
...tank to expose the fuel module. It is a all in one assembly and it is inside the tank. You will need a cam lock tool to remove the ring that holds the module in place. You can purchase the tool at ...
...Flickers back and fourth when i turn the key on, but only sits on 1/4 tank when its running no matter how much fuel is in it. look for a bad ground, loose/broken wire/connection around the gas
...my truck and it won't start No fuel pressure indicates one of three problems. Fuse in fuse box, relay in relay box under the hood or fuel pump located in fuel tank. 2004 yukon denali no fuel ...
Fuel Pump harness from the frame to the tank. See if there is any damage to the wire's and connection clips. But if your going to have to change the Fuel Pump, change the harness too. The extra $12.00
my fuel pump is out try to drain gas tank but hose wont go through the tank to get to the fuel you may have to remove the filler tube at the tank and go direct in tank.The filler tube has anti theft
283 questions posted
Usually answered in minutes!
561 Questions
369 Questions
253 Questions
167 Questions
170 Questions