2004 GMC Sierra 1500 Crew Cab "03 change front" Questions

Ad

03 Windstar. It ended up be worn inner tie rod ends. Would reccommend an inspection of bushings, tie rods etc. Rotate tires & see if it continues, if not, it's the tire, if still there, have front

Ad

...03 dodge stratus sxt coupe 2.4L dont know if your changing front or rear but i suggest buying the struts as an assembly. this way you get everything new. rock auto just got a new listing for these. ...

Ad

Question about GMC Sierra 1500

1 Answer

...03,NOT A 02 ESCAPE) CHANGED THE FRONT RIGHT ROTOR AND PADS AWHILE BACK.I DID HAVE A HARD TIME GETTING THE ROTOR OFF.NOTE THE CAR HAS 130,000 MILES ON IT check the rear axles for a broken sensor ring. ...

Question about GMC Sierra 1500

1 Answer

front turn signal went out i got a 03 bmw 325i and the front turn signal went out how do i change it should be accessible from backside of lamp assembly. rotate bulb holder and it should pop loose.

Question about GMC Sierra 1500

2 Answers

...03 ford f250 when driving and i go over a bump i get a clunk from the right side front A few different things can cause the same sound. My advise have your shop shake down the front end. easiest and ...

...03 camry xle.. Makes grinding noise (front driver side)when i hit the brakes.. And when i turn with brakes applied. Changed brakes rotors and caliper and it didnt help.. If anything i think it got ...

...change the back 3 spark plugs of an 03 impala its a good idea to use a jack to brace the front of engine. then you remove the front motor mount and allow the engine to come forward but stil support ...

...front end of 03 pontiac bonneville wheel bearing right side changed 3 years ago today changed left wheel bearing noise still there if the brake rotors show signs of blacking, this will cause noise My ...

...03. WHERE IS THE OIL FILTER LOCATED? You cannot change the filter unless you have access to a lift or pit. It is located on the back of the engine, recessed above the front axle. I took mine to a ...

change front struts on 2002 chevrolet trailblazer,how do they slide off. i did the front struts on my 03 envoy, same thing as trailblazer, it is a very difficult thing to do and you need a few special

Not finding what you are looking for?
Cars & Trucks Logo

317 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...