2002 GMC Sierra 2500HD "4x4 lights dont work" Questions

Ad

...4X4 1500 PU. I changed the oil two weeks ago. Thanks, Gene with key on engine off depress accel pedal 3 times within 5 secs. You may have to repeat the procedure several times for the reset procedure ...

Ad

...dont work, they are on very dim but not like the right side. switched relays made no change. bulbs are new. 2003 GMC 2500 HD 4x4 with 6.0 vortec V8 check wiring harness directly behind light wires ...

Ad

...4x4 the lights work but it dont go into 4x4 when i try to put it in 4x4 the lights work but it dont go into 4x4 and it dont make any nosie Sounds like the transfer case motor is going out or bad, i ...

Question about GMC Sierra 2500HD

1 Answer

...4x4 selector switch on dash blinks then goes out and service 4x4 light comes on just bought suburban so i dont know that much about it but it would be nice if i could get 4x4 to work. thanks buy ...

...dont work the cruise control fuse blew out then 4x4 wouldnt work i have a o4 chevy colorado 4x4 and i lost my 4x4 in my truck its a 2.8l and when i push the 4x4 swich it blinks a few times and then ...

...4x4 inside on but only rear traction i dont hunderstand????? Do you hear any clicking sound when you pusg the button for 4 wd? If so check fluid in the T case, and check to make sure that the wiring ...

Question about GMC Sierra 2500HD

1 Answer

4x4 dont work ,on my 2007 compass i had my windshield broken and the wather got in so my 4x4 dont work anymore, when i pull to conect the 4x4 the light come on as it will be working adn after 5 ...

...4x4 with manual hubs and push button transfer case the lights for my 4 wheel drive will sometimes come on and turn dim. when i try to use my 4 wheel drive it wont engage. I turn the hubs and still ...

Question about GMC Sierra 2500HD

1 Answer

...4X4 LIGHTS FLASHES ABD THEN GO DEAD SOMETIMES ITS STAYS ON AND AS SOON AS YOU SHIFT IT TO DRIVE THE 4X4 LIGHTS DIES AGAIN CAN ANYBODY HELP WE DONT HAVE ANY DEALERS IN SOUTH AFRICA this is a normal ...

...4x4 4 cylinder i can shift it in 4 wheel drive and i can see the front drive shaft spin but the front wheels dont move i have automatic locking hubs. i dont see a fuse for this or under stand how it ...

Not finding what you are looking for?
Cars & Trucks Logo

362 questions posted

Ask a Question

Usually answered in minutes!

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...