...top where the fuel pump is. I saw this happen to an outboard motor of all things. The fuel pickup tube in the tank had a crack in it lengthwise letting air be sucked into the tube when there ...
...top end you might as well for a few dollars more do the bottom end as well or you can replace the engine with one that dont have leaks or problems just make sure if you are to get another engine make ...
Question about Hyundai Cars & Trucks
...cover gasket. The car has trouble with 1st start after being left unused for a few days and then starts ok after engine has warmed. It also has poor acceleration, rough idle and and occasional ...
top off your fuel tank. May take a couple tanks, and this won't help much if you can't keep the car started and running long enough to run the gas+cleaner through your injectors. Fuel Pump. A bit more
mean NOBODY has ever been able to fix. I am the original owner of this truck and can attest that this problem has been around sense I purchased my truck in 2001. It has been in the Chevrolet shop four
...top of the tappet cover, with a pipe that takes the crank fumes and burns them with the combustion. It is a matter trail by elimination unfortunately!Best regards Johngee10 Basically this means that ...
Question about GMC Sierra 1500
top of the reservoir and leaking out around the cap, then you're either overheated, or you may have air in the coolant that is expanding and pushing coolant up into the reservoir. You can look up 'How
Question about GMC Sierra 1500
...top, of valve cover it has wells spark wells are they full of oil, that is the 60k tuneup step that calls out valve lash checks and new gasket there.' if they fill with water or oil , that will make ...
...top of the engine, look at the "inside" of the cap to see if there is "foamy gray oil goo" sticking to it. If present it is definitely blow head gasket. In severe cases this "gray foam" will be ...
Question about Opel Cars & Trucks
...top, do you mean the head gasket ? if so have you retightened the head bolts as is the normal process , if the leak and power loss is still there after checking head bolt torque then will probably ...
477 questions posted
Usually answered in minutes!
187 Questions
177 Questions
34 Questions
33 Questions
13 Questions