2001 GMC Yukon Denali "starter problems" Questions

...will cause a no crank situation.usually the theft light flashes.this could be a problem with the starter itself.the starter solenoid may have an internal problem.if you have someone try to start

...has power but will not crank the engine neutral safety swith is less then 6 months old, swapped starter relays and the last time this happened resetting the ecm fixed the issue. now back to no ...

...a clicking sound. so i just keep turning the key back and fourth and it will start. could it be the starter Yes it could. The start solenoid has a large washer that has to make contact to flow the ...

...goes off to reset the security system. Sometimes the problem has been the ignition switch power to starter. If you have checked that, then: This procedure usually works: ·Check the battery cable ...

starter,Thought it was fine! we washed it no problems drove about 30 miles and shut it off,went to leave no start.Starter kicking back,crank over no start,whole motor clunking.Would not stop kick back

...Its getting power is the engine turning over when your trying to start it? if not could be the starter if you have probs explain your problem fully and i can try to assist My battery is good.

...problems at the starter or where the negative cable connects to chassis or block. Any cable connecting these two should also be removed and cleaned. Remember to ALWAYS disconnect the negative battery ...

...problems I wouldn't suspect ignition switch , not without testing . B+ voltage in an out . I would do voltage drop testing on the main battery supply cable to the starter an under hood fuse box . You ...

...at random and something is drainging my battery. Took it to GM and they tested thee altenator and starter and found them to working fine but cannot explain the drain of the battery. Could the ...

My 2005 Yukon denali won't start, I have replaced the fuses, relays, the starter, the ignition switch, battery, and removed the alternator and had it checked. The truck still will not start ...