1998 GMC Suburban "replacing low beam wiring harness" Questions

...low beams, no high beam indicator light. Bulbs seemed to be ok, fuses seem to be ok. Not sure whether or not there should be drl but I've never noticed it (only had the truck a couple of months). ...

...low beam switch in my 98 Suburban? The switch is bolted to the left side of the steering column under the dash. Make sure you have good lighting look under and pull the leaver as you would to turn ...

...low beam switch mechanism to fall out of the actual high/low beam switch attached to the steering colmn.there are a couple more things like a flex type washer and the white horn mechanism to remove ...

low beam , then no high beam lights at all, are they hooked through a seperate fuse, some kind of module, or something different, low beam works great with the switch but they do not comeon as driving

...low beam headlight is out, i tryed looking at the wires and fuses but it all looks fine....well the thing is while back my old harness for the low beam was burnt and cracked so i cut it and replaced ...

low beam to high beam the low beams go off and only the running lights come on I also get no blue bright light indicator on the dash. How exactly do the bright lights work? check the high beam relay..

...low beam headlight on the passenger side of my 1997 Blazer, but it still won't work, the high beam works fine. check for a bad ground or check plug and back track wires with test light till you get ...

...more likely a fuse or the hi - low switch than the wiring harness, or perhaps the bulbs went out simultaneously. I would check or have these checked before I go as far as replacing a wiring

...low beam headlight is out, i tryed looking at the wires and fuses but it all looks fine....well the thing is while back my old harness for the low beam was burnt and cracked so i cut it and replaced ...

low beam headlight won't work with a new bulb low beam headlight won't work with a new bulb Remove the affected headlight and replace the headlight socket on the wiring harness. I've had ...