1995 GMC Sierra "replace main rotor" Questions

...main coil lead wont reach a suitable grounding point with the sparkplug) - check for solid bright blue spark, it should be regular timed, and strong EVERY time - any missing or weak sparks indicate ...

main coil wire. Then remove the spark plug on the 1 cylinder. Bring the cylinder to top dead center. Remove the distributor cap and make sure the rotor is pointing to the 1 cylinder. At this point you

I have a thumping noise which sounds like there is some type of looseness in the suspension or steering. There does not appear to be any axial or lateral slop in the steering column at all. It is ...

...ignition parts to corrode so badly? OLD AGE AN MILEAGE,DID YOU REPLACE GAS FILTER,ALL PLUG WIRES.DIST ROTOR,YOU MUST OF HAD A MISS IN THE VEHICLE,AN PCV VALVE,CLEAN THROTTLE BODY OUT OF CARBON BUILD ...

...replace remove wheel remove caliper if brake pad cage raps around rotor remove with 2 bolts from backside take big hammer and tap surface of rotor near wheel studs use care not to hit studs. one or ...

...wih a litlle grease or something? No need for a press? They have holes in that sit on your wheel studs.The wheels are the main restraint for the rotor with secondary restraint from you brake

Does '89 Sentra disc brake replacement require bearing removal? Some cars do and some don't, most cars the rotor is bolted, or clipped on and just comes off by itself, some other cars are one piece ...

...rotor but still wont work. could it be the main relay and if it is who can i check if its good. you may want to have the cam and crank positioning sensors checked out so there is no spark? if not the ...

MAIN RELAY, ECM, DISTRIBUTOR, IGNITER , COIL, ROTOR CAP, ROTOR, PLUGS WIRES, PLUG, FUEL PUMP, FUEL FILTER, CAR STARTED TOOK MY SON TO SCHOOL AND ON THE WAY HOME CUT OFF AGAIN AND NOW BACK TO KNOW FIRE

...Replace calipers, ceramic pads, etc. Still warps rotors in less than 5000 miles. do you do a lot of hills work?if so use the gears ,ifdown hill not the brakes if it is auto then slip it down i gear . ...