Question about Volkswagen New Beetle
...99 New Beetle goto a sears automotive center,walmart,pepboys or some place like that, they sell OBD 2 code readers for the car, you connect it up to the computer and it will tell you what the code is ...
Question about Volkswagen New Beetle
...remove a alternator on a 1998-99 Intrepid, and reinstall new one FIRST OF ALL.TURN OFF RADIO SO YOU WONT LOSE RADIO CODE.FOR THE 2.7L ENGINE.DISCONNECT NEGATIVE BATTERY CABLE.REMOVE THE LOWER PLASTIC ...
...99 Cabrio, Golf, and Jetta Remove the negative battery cable. Raise and safely support the vehicle. Relieve the fuel system pressure. Remove the rear seat and the access cover. Disconnect the wiring ...
Question about Cars & Trucks
...remove my solenoid from 99 accord lx 6 cyl this has a separate solenoid from the starter, mine seems stuck is there a trick to this? Yes you can test it, if it clicks and starter doesn't engage ...
Question about Volkswagen New Beetle
...99 dodge durango every morning the battery is dead, a mechanic said my battery was junk so I replaced it with a brand new one and something is still draining the battery. you have something draining ...
...99 vehicles, remove the CKP sensor shield. Fig. 1: If so equipped, remove the crankshaft position sensor shield Unplug the sensor electrical connector. For 1987-91 vehicles, perform the following: ...
99 ford contour hazard flasher unit where is it Flashers - REPLACEMENT Turn Signal Flasher (see Figure 1) Fig. 1: The turn signal flasher is located on the multi-function switch in the steering column
...99 dodge durango? Disconnect battery. Find positive battery wire and follow it to lower side of engine to the starter. Disconnect battery wire from starter. Loosen & remove the (usually 2) ...
...replace headlight switch in 99 saturn sl? remove battery (must do ( safety first ) ) then remove air bag then remove wheel then remove clock spring then remove headlight and wiper switch rev to ...
...99 neon that won't start after removing the computer it was working but I removed the computer to work on something and now it will not start. Do I have to reprogram the computer? did you disconnect ...
656 questions posted
Usually answered in minutes!
37 Questions
29 Questions
14 Questions
3 Questions
8 Questions