...1 8 turbo vw 2000 how to change spark plugs on 1 8 turbo vw 2000 new beetle In here you can find one DIY: 1.8T Coilpack and Spark Plug Change (with pics) Hope helped with this (remember rated this ...
...Turbo L4 VIN "W" Firing order: 1-3-4-2 Cylinder# Radiator to firewall: 1-2-3-4 Distributor: Clock wise #1 is located by the 1 O'clock position and the next one over is Cylinder #3, 5 O'clock
...2000 rpm and restart then it work fine, turbo work, for 1 day, we did change the air filter but problem persist, what else could we check, also were could we get a code reader and cd or manual. thx ...
...turbo is common on the tdi engine a fully recondition unit will cost you around £500, a second hand 1 will cost you from between £150-£250, but just be carefull as you will need the ...
...2000 saab 9-5 wagon turbo 4cyl i will drive my car and stop then try to start but wont start untill i let it sit for awhile? water temp switch faulty. check 1º crankshaft sensor(see if RPM are ...
1.8 Turbo: 1-The car has no boost at taking off! Takes a few seconds to get to speed! Could it be a turbo failure? 2- When I start the engine...it sounds like the fan is on after a few seconds? Thanks
Question about Subaru Cars & Trucks
2000 subaru outback has new fuel pump and relay but keeps blowing fuel pump fuse after a few minutes . is there anything else on that circuit That circuit usually includes these possible components: A
Question about Volkswagen New Beetle
Turbo 7.3L engine. The starter was removed and I am trying to install a new starter. I'm not sure about the wiring. I cannot find the Solenoid Relay, and currenlty I have the postive batter cable with
Question about Volkswagen New Beetle
2000 3.0L V6, what type of modifications must be done if any to install the turbocharger? The modifications would be intensive to say the least, I am personally building a taurus SHO Motor for a turbo
Question about Volvo Cars & Trucks
...1 spark plug wire attach to on a 2000 volvo s40 Trying to find out in the number 1 spark plug wire connects to the number 3 coil or the number 4 Attach to the #4 coil. Firing order should be 1-3-4-2 ...
656 questions posted
Usually answered in minutes!
37 Questions
29 Questions
14 Questions
3 Questions
8 Questions