2000 Pontiac Grand Am GT "sending unit fuel pump doesn" Questions

...sending unit and fuel filter replaced. I've also had the fuel pump checked and it's working fine. Once it turns over the car runs great. Do you think I am damaging the car by driving it with this ...

...sending unit which sends a signal to the gauge is stuck or defective. It?s in the fuel tank. Buy 2 containers of Chevron Techron at Wal-Mart and add to the fuel tank. Sulfur deposits build up on the ...

...sending unit replaced also ? Or was it part of the new fuel pump module ? If the sending unit was also replaced an the gauge still isn't working you have a faulty gauge or wiring problem , maybe . ...

...work on my 00 s10 My fuel gauge doesn't work on my 00 s10 Your fuel sending unit is attached to the fuel pump,it is sold as a assembly and the fuel tank has to be removed to get to

sending unit or a lost ground on the fuel tank. Disconnect the fuel gauge at the tank and with a twelve volt test light well grounded probe the harness terminals with the key on (engine off). The fuel

...sending unit is bad will it stop fuel pump from working on a 2000 blazer have changed fuel pump and filter still wont start, plugged in new pump and heard it prime, put it in tank and now it wont ...

...gauge doesn't work,is there a relay for it fuel gauge doesn't work,is there a relay for it fuel level sending unit on the fuel pump assembly is faulty location in the fuel tank. in fuel ...

...doesn't work You don't list your year or model but more than likely it is the sending unit in the tank. Some are replacable and some come as module which is the pump and sending unit in

when it doesn't start. Already changes fuel pump relay. Hey man if you already changed out the relay i would try changing your fuel pump and sending unit that should stop both of your problems

...your fuel pump is bad. The fuel sending unit, which tells your gas guage how much gas you have is integrated into the pump so when you replace the pump it will fix both problems. Good Luck! ...