2000 Pontiac Grand Am GT "know caliper hanging" Questions

Ad

Question about Pontiac Grand Am

1 Answer

know what I am up against here. You'll have to replace the pads and rotors....super simple! They come off easy and the whole job is less than $100.....will cost WAAAAYYY more at a garage. Removal &

Ad

Question about Pontiac Grand Am

1 Answer

...caliper off. Find somewhere to support it. Don't let it hang by the brake line or you will be in for some trouble. I don't know if you are going to replace the rotors or just the pads. If you are ...

Ad

...know how to replace the hub bearings on my grand am The front wheel bearings on this car come as a sealed unit inside the wheel hub. things you will need to replace them -torque specs for your cars ...

caliper. I know it slides up but I want the caliper off the bracket The top of the caliper, should slide off.the pin, if not, take and remove the caliper bracket bolts. Do not let caliper hang by hose

...know how to remove the front rotors off of a 1987 chevy k-5 blazer? remove tire remove both bolts from caliper remove caliper and secure out of way dont let hang by brake line remove both bolts from ...

Question about Pontiac Grand Am

2 Answers

...know the caliper is faulty if you have a caliper not working it will pull to the side that is working / the harder you apply the brake the more it will pull . that's a bad caliper A good way to find ...

...inorder to remove the caliper bracket before removing the Rotor. Let me know if this helped, or if you have any additional information, problems, or questions. Feel free to contact me at

Question about Pontiac Grand Am

1 Answer

KNOW HOW TO CHANG ROTORS ON 2000 ACURA INTEGRA GSR TO CHANGE FRONT BRAKE ROTORS. FIRST YOU NEED TO SAFELY RAISE SUPPORT VECHICLE ON JACK STANDS.MAKE SURE VECHICLE PARKED ON LEVEL SOLID GROUND.YOU NEED

Question about Pontiac Grand Am

1 Answer

...of what u removed), tighten them in the rotor, they will push it off easily. Reverse to install, tighten bracket to 80 ft lbs, caliper to 20 ft lbs. Let me know if u need more info. ...

Question about Cars & Trucks

1 Answer

...caliper or the person who put it together at the factory scratched the piston or cylinder wall and that could be causing it to hang up. Maybe the rubber boot that protects the piston came loose and ...

Not finding what you are looking for?
2000 Pontiac Grand Am GT Logo

2,020 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...