...Intake Manifold... (see Figure 14) The 3.1L engine is equipped with upper and lower intake manifolds. The upper intake manifold is also known as the intake manifold plenum. CAUTION The fuel system is ...
...intake manifold and specs for the rockers Hi there, the following information are for a 2004 Grand Am 2.2L, I hope it helps: ...
...intake manifold , The intake manifold can have several types of leaks, the intake can have a vacuum leak, oil leak, coolant leak or a combination of any of the before mentioned....hope this helps, ...
...intake manifold on the drivers side of the engine compartment. You don't need to remove the exhaust. The best way to get to it is to remove the air cleaner and the duct attaching it to the throttle ...
...manifold torque instructions please help Head Bolts Torque sequence --------- ' 6 2 3 7 ' ' 5 1 4 8 ' --------- Step 1: torque in sequence to 33 Ft/Lbs Step 2: turn an additional 90 degrees recheck ...
...intake manifold attaching bolt and nut, then remove the housing. Remove the thermostat. To install: Clean all ...
...intake manifold, then position aside. Unfasten the cooling fan shroud attaching bolts, then remove the shroud (including the MAP sensor). Remove the coolant fan-to-upper radiator support bolt, then ...
Intake Manifold Gasket (upper and lower in my particular case) What you are experiencing is coolant/water leaking out through wholes in the intake gaskets.... which is mixing with your oil, check your
...intake manifold bolts. Remove the thermostat housing outlet and thermostat Clean the mating surfaces. To install: Install the thermostat and housing outlet. Install the thermostat housing bolts. ...
...intake manifold. The thermostat is between the intake manifold and that pipe assembly. It may not be an easy job replacing it, and the correct thermostat may be hard to get at the average parts
2,020 questions posted
Usually answered in minutes!
1,771 Questions
1,538 Questions
1,504 Questions
1,208 Questions
1,285 Questions
