2000 Pontiac Grand Am GT "holds sprocket gear" Questions

Ad

2000 pontiac grand am 2.4l, no markings on the sprockets for the timing, what is the positions of sprockets to put in alignment? You will need two small bolt's, that you thread through the hold's on ...

Ad

...the gear (sprocket) on. Re-install the new gear and torque to 37 ft-lbs. The new gear is slotted so it can only go on one way. Do not mix up the intake & exhaust balance shaft gears. Good

Ad

...gear you are talking about changing the chain drive gears if so yes it can be difficult because the rear wheel must be removed and also the front sprocket must be held stationary in order to unscrew ...

Question about Pontiac Grand Am

1 Answer

...gear in such a way that the timing marks will line up between the shaft centers and the camshaft locating dowel will enter the dowel hole in the cam sprocket. Place the cam sprocket, with its chain ...

gear. Then the silver link should be down at about 5 O-Clock on the crankshaft timing mark. The other silver link should then be aligned to the mark on the exhaust cam sprocket. See picture below. For

can't find TDC timing mark on 3.1 L 5cyl. diesel i guess you have removed the front cover exzposing the timing gears. find the crankshaft and turn it until the two dots are at the top. the next ...

Question about Jeep Cars & Trucks

1 Answer

...sprocket gear to the timing mark on the counterbalance shaft drive gear, then seat idler sprocket fully . Before installing idler sprocket bolt, lubricate washer with oil, and tighten idler sprocket ...

Question about Pontiac Grand Am

2 Answers

...gear puller, remove the crankshaft sprocket. To install: Press the crankshaft sprocket back onto the crankshaft. Install the timing chain over the camshaft sprocket and then around the crankshaft ...

gear sprocket (crank sprocket) should be facing straight up, (facing eachother). You need to take this back apart, pull the chain and sprockets off - put the chain around the sprockets after lining up

Question about Pontiac Grand Am

1 Answer

...check the main shaft, sliding clutch gear and the sprocket assembly of the TRANSFER CASE. have an attention on sliding clutch that holds the connection among gears that transfer powers to the

Not finding what you are looking for?
2000 Pontiac Grand Am GT Logo

2,020 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...