2000 Pontiac Grand Am GT "air pump fuse" Questions

...pump.Just check that there are no air locks in the system first.If you pull the feed line off before the filter and crank the engine if still no fuel then check the fel pump fuse first,if ok test the ...

pump on many vehicles has a switch incorperated into the air flow sensor. This is to stop any chance of flooding....If the air flow has a gate try pushing it open a few milimeters and see what happens

...air cleaner hose. Reinstall. If vehicle starts then shut off, suspect possible faulty fuel pump relay, fuel pump fuse, fuel pump, or wiring to properly check fuel pump you need to install a fuel ...

...pump has been changed,sensors 3 at least,when added either to air filter it kept running as long as it was fed with either Check for a bad fuel pump relay in the fuse and power distribution box. The ...

...PUMP LOCK UP HARD TO TURN.MAKE SURE DRIVE BELT NOT SLIPPING DUE TO BAD BELT TENSIONER.CHECK TO SEE IF COOLING FANS TURN ON WITH AIR CONDITIONER ON HIGH.IF NOT CHECK HEATER + AC IGNITION FUSE.IF FUSE ...

...air intake, the car started then stoped Hi, Check the fuel pump and fuses. Sounds like no fuel is getting to injectors. Also chek for computer codes this will give you an idea of where to look. Good ...

...BE MANY THINGS LIKE FAULTY IDLE AIR CONTROL VALVE, FAULTY ENGINE COOLANT TEMPERATURE SENSOR,FAULTY FUEL PUMP RELAY OR FUSE,AND FAULTY PCM AND TRANSMISSION TORQUE CONVERTER STILL LOCKED IN OVER

air to blow hot it is the 30 amp big fuse compress is good freon is good Hi, if the Compressor is running and you can see and hear the clutch on the front of it engage, the 30 amp fuse is good and not

air filter, so that's not it. I already 2 cans of HEET and 2 containers of high octain additive. Still won't start without starter fluid or stay running. Any suggestions? Thank you! 1994 Pontiac Grand

...pump ,thermostat,had the radiator flushed change the relays, fuses and now i have no heat one hose gets hot and the other one dont! it will bleed air out of the bleeder screw then push all the water ...