2004 Mazda MX-5 Miata "small engine troubleshooting starts keep" Questions

...engine off a small amount of power is 'pulled' from the battery. I'd suggest you periodically start the car and let it run for a short time. This will keep the battery charged and also pump oil to ...

...after I start the engine unless I keep it running above about 2000 rpms for around 10 minutes or so. What is wrong? Check your small hoses for cracks. They control modules that are sensitive to

engine light checked and it keeps reading small evap leak and have replaced gas cap but still the same issue Click this link below and follow the details,to troubleshoot the problem.:--http:

engine. Power in the small wire while trying to crank means 99% starter problem......no power means 99% switch. The switch is available in the after market parts stores. Im not sure what happened, you

...small code reader and i can erase the code. but if i shut it down sometimes it will come back on. P0449 = Evaporative Emission Control System Vent Valve/Solenoid Circuit Malfunction. The Powertrain ...

...engine check light, code 401 low egr vacum egr and hoses seem ok . could this be caused by vac ctl switch. is this commom problem wits vechicle? how do i troubleshoot to keep from buying unneeded ...

engine, let it sit for a while, go out to start it lower gauges won't move and the upper one just have the oil light and ABS what could be wrong Tricky. Could be a number of things. First start small.

small pipe to reach the box) to kick it back into operation. Here's a quick 15 minute test: Try this: keep the tank -Filled Up- this will help to cool the Fuel Pump which sits in gas inside the tank.

...engine, keeps cranking or just the starter makes spinning noises. (we cant guess this and is key to why , no pun) what i do is put a voltmeter (10 bucks at walfart) on the small solenoid ...

...engine with 250,000 miles on it. I was going down a small hill and accelerated up the other side and the engine shook real bad and idled rough and now it cranks over but won't start. I have codes ...