2002 Mazda B-Series "disconnect fuel rail lines" Questions

Ad

...fuel line disconnect tool.You should be able to get one for your specific vehicle at an auto parts store.However that is not the correct or safest way to check for a bad fuel pump.Check out this link ...

Ad

...fuel lines, disconnect the fuel lines from the rail assembly. Carefully lift the fuel rail assembly and fuel injectors from the intake. Carefully release and separate the fuel injectors from the rail ...

Ad

Question about Mazda B-Series

2 Answers

...FUEL RAILS. DISCONNECT LINES AT THE ENDS OF THE FUELS RAILS ASSEMBLY. MARK AND DISCONNECT THE FUEL INJECTOR WIRE HARNESS CONNECTORS. REMOVE THE FUEL RAIL RETAINING BOLTS, DISCONNECT THE VACUUM LINE ...

Question about Mazda B-Series

1 Answer

...disconnect the fuel line at flex line to steel line leading to the fuel rail need to buy disconnect tool that slides around line and u push into connection and it releases the line all auto stores ...

Question about Mazda B-Series

2 Answers

...disconnect the fuel lines that go to the fuel rail any ideas You need a special tool to remove them. Available at most automotive parts stores. on the fuel rail there is a round connector you need to ...

Question about Mazda B-Series

2 Answers

look like. if its a 3.3 you need a TORX screwdriver to take the two screws out of the regulator, then disconnect the fuel line, actually take the fuel rail off then disconnect the line then the screws

...Disconnect fuel line latch clip and fuel line at fuel rail. A special tool will be necessary for fuel line disconnection. Remove necessary vacuum lines at throttle body. Disconnect electrical ...

Question about Mazda B-Series

1 Answer

...not gettin fuel to the fuel rail i disconnected that line to check amd there is no fuel up to the rail so im wondering if the psi regulator is bad I think the pressure regulator may be the cause

disconnect fuel line and hook up a fuel pressure gauge to test fuel pressure. 1.6L DOHC (same way as the ISUZU impulse ) same car. 4XE1 engine twin cam. has MPI injection with fuel rail, regulator and

...Disconnect fuel supply tube from rail. Remove the Intake Manifold, refer to the Engine section. Disconnect electrical connectors from fuel injectors. Remove bolts holding fuel rail. Remove the fuel ...

Not finding what you are looking for?
2002 Mazda B-Series Logo

59 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...