2000 Mazda Protege "3 sensor problems" Questions

...3.Inspect boost sensor solenoid for leakage, blockage and/or sticking caused by rust build-up. 4 Inspect EGR valve "hose" port for blockage. 5.Replace boost sensor if sensor was produced before ...

...3 minutes but cut off . pushed it out of the road in 10 min it started. let it sit for 1.5 hrs it was ok sensor problem ,could be the crank sensor accepting water seepage was it raining when car cut ...

...3 hours. Plugs, wires, gas pump, temp sensor, seem good (Tested with computer). motor definitely gets flooded every time I try to start cold I need to disconnect the injectors 4-5-6-7 times to get it ...

...rev up. i tried a new tps sensor and checked all obvious things. please help that is your 3 and 4 shift solenoid in the transmission. it is stuck open and needs to be replace. it is very easy to

...sensor) it's job is to see how much you open the throttle( how much you push the gas pedal) and sends this info to PCM .and pcm tells injector how much more or less gas the engine needs. on some cars ...

sensor? Does any one have the correct timing marks for this engine. All the help is greatly appreciated. Thanks Rodger first of all with 3 cylinders 25lbs -1 100lbs. you have a problem with the vavles

...3 hatchback has the auto feature on the driver side door window, when I try to close it using the auto mode it closes tight then immediatly opens half way,no matter what I do it will not stay ...

...3/4 way, then back down. guage staying the same includes driving 15 mi. from town to home with some smaller hills. Seems to perform fine. I believe this may have been symptoming in the early spring ...

...3 x , coolant temperature sensor and checked the mixture on the coolant to make sure it was correct. I have done an air bubble purge on this car at least 3 times and the gage still stays on cold for ...

...3. engine good spark good and if spark is good ,fuel tests is now allowed. my guess is 1.6 L ZM-DE. this engine? aka Z6 16valves, DOHC. belt drive, gen 9 car. so 22 years old and running the cam belt ...