2000 Mazda Protege "1 transmission" Questions

...will only change in manual runs fine changes fine manually light on dash goes straight to 1 not d The transmission shop did not adjust the shift lever indicator correctly for the dash. Take it

429,r:1,s:0 There's a tool made for the axles in shape of a u that fits in between the axle and transmission but make absolutely sure there is nothing holding it from seperating before using this tool

...1--circuit low ===causes --wiring short to ground--intake manifold air control actuator ---intake manifold air control solenoid There may be a connection to the transmission via a vacuum hose or ...

...apply it again and it would only click and so on). Thanks for all your help. your transmission fluid level is low probably 1/2-1 qt. check w/vehicle running and in park. warm vehicle up b-4 ...

...1/2 hour my ABS and E brake lights come on then the transmission acks up. Please HELP! It sounds as if you may have a short in the wire harness, or a bad plug on one of the sensors. This is common. ...

1) it shakes even worse. Transmission level and oil level are fine, and so are spark plugs. You do not use any vehicle with a Check Engine Light on or flashing You have it checked for codes & find

...transmission chokes around 1-2,000 RPM's. (very inconsistently) It's kind of lagging at freeway speeds but not as bad. The check engine light came one for a few hours and went off but the car ...

1, 2 are perfect, but on the upshift to 3rd the engine runsaway and there is now gear! If I push the O/D button, then it will dawnshift to second. Any ideas? Buy the best transmission oil you can find

Transmission range sensor, circuit malfunction (PRNDL input) Check engine light on & overdrive light flashing. Car hesitates when driving until shut off & restarted. Overdrive light shuts off

transmission the first transmissio i drove on it 1 day then it wouldn't change over put a 2nd one in it the same thing happenned what's th I have a 1999 Mazda protege' I had to replace