1995 Mazda 626 "2 belt replacement" Questions

...2 miles belt jump timing replace tension& spring If you have replaced the spring loaded belt tensioner ( leave the pully nut loose ) then on refitting the belt , at a point midway between the two cam ...

...on one of the pulleys. 2005 Mazda : Question 1: Belt? or Timing Chain? Question 2: Tensioner pulley...Can it be tightened??? Question 3: When replacing tensioner pulley, cutting AC belt

...2.0L, the timing belt was On my 2000 Mazda 626 LX 2.0L, the timing belt was just replaced and it runs worse now than before - plugs are in correct order (1-3-4-2) but it shakes worse than ever. When ...

...2" drive and slip the old belt off. Then just do the opposite to put the new one on. I don't understand what you mean by speedometer not working. Do you think the two are related? If the speedometer ...

...belt. Most tensioners have a area where a 1/2" ratchet or breaker-bar can be inserted to release the tension. The tensioner is nothing more than a spring loaded pulley, so look for the pulley that ...

...2 teeth. This happens quite often when you tighten the belt tensioner. Realign your timing marks on the crankshaft and see whether the cam marks line up or not. If not loosen the bel, ...

...belt? Check for misalignment there. What makes it break? Does it happen after a long trip ( 2 hrs. highway driving) or at timed intervals ( every month, 6wks)? Carefully check all the pulley's for ...

belt, resulting possible engine stalling. Dealers will check the tensioner installed and replace it if the vehicle is equipped with the affected tensioner. Owner notification began September 28, 2000.

How to replace a serpentine belt very easy procedure. Take to an auto mechanic for the 2 minute assembly. Its that easy.

...2 power steering (I mite be wrong on these all together) that was 3 weeks ago . I just noticed that they are fraying. Wh The 1 going to the water pump shredded.. Not break shredded... I just decided ...