1991 Mazda 626 "hold system" Questions

Ad

Question about Mazda 626

1 Answer

...if head gasket is ok, next you could check your rad cap, is the gasket ok? can you check if it holds the required pressure. might need replacing. also if you could pressure test the coolant ...

Ad

Question about Mazda 626

1 Answer

system gravity bleed for @ 1/2 hour ensuring the master stays full. Then close all bleeders and starting furthest from the master (r/r) have someone pump the brakes 2-3 times,hold the pedal down, then

Ad

Question about Mazda 626

1 Answer

HOLD SYSTEM LIGHT FLASHING wont shift at all now 91 mazda 626 should i put a bullet in her? There a fuse in the fuse box change it and it will shift i think it is a number 15 fuse

...hold system come on in my 89 madza 626 while im driving. Can it be a sensor? yes it is there is a problem with the transmossion check the fluid level and if not that check the solonoid sensors on the ...

...system. Get a mate to pump the brake pedal a few times then hold it down while you open the bleed screw starting at the nipple furtherest from the m/cyl. Hold down the pedal while you retighten the ...

code 17 on a mazda 626 1992 lx what does it mean code 17 on a mazda 626 1992 lx what does it mean The OBD-1 two digits trouble codes listed 'code-17' as: Oxygen sensor. This means that the fuel and ...

Question about Mazda 626

1 Answer

...not help, then borrow a cooling system pressure checker from a place like Autozone, and see of it holds pressure for 5 minutes after pumping it slightly above cap rating. Then start engine and see ...

Remove the top radiator hose from the thermostat housing at the top of the engine. Remove the bolts holding the housing to the engine and then pull the housing up. It may be stuck and you will need to

...hold it down while you loosen the bleed screw to let the air out. The pedal will go to the floor and must be held down until you tighten the fitting back up. If the brake pedal is let up before you ...

...hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any ...

Not finding what you are looking for?
1991 Mazda 626 Logo

179 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Mazda 626
1999 Mazda 626

544 Questions

2000 Mazda 626
2000 Mazda 626

410 Questions

1998 Mazda 626
1998 Mazda 626

356 Questions

1995 Mazda 626
1995 Mazda 626

269 Questions

1997 Mazda 626
1997 Mazda 626

277 Questions

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...