1991 Mazda 626 "6 engine intake car" Questions

...the estimate to repair your vacuum leak at your intake (also assuming the intake will have to come off the engine to fix the leak), the cost will be around $350.00. Is it a 4 cylinder or 6? ...

...rotation: Counterclockwise Fig. 5: 1998 2.5L (626) Engine Firing order: 1?2?3?4?5?6 Distributorless Ignition System Fig. 6: 2.3L Engine Firing order: 1?2?3?4?5?6 Distributorless Ignition ...

6 inch extension and a 10 mm socket, possibly a 1/2 and 12 mm, i can't remeber exactly. Also bring a phillips screwdriver and a pair of needle nose pliers. Remove the intake box and air mass meter and

...6/Probe Models 2.0L ENGINE (see Figures 5, 6, 7, 8, 9 and 10) Disconnect the negative battery cable. Remove the fresh air duct and resonance chamber. Fig. 5: To remove the starter motor, first remove ...

...engine turns over but when i give it gas it does not fire... any suggestions as to the problem. b_bro Check the Fuel injection system (injectors) and the intake manifold. It might also be wise to ...

...6. Obtain a can of "Starting Fluid" from an auto parts store ($3). and spray for one or two seconds into the air intake of the engine. 7. If it "trys to start", then it is a fuel problem. Hope this ...

...6. It depends on which engine you have. The first is 1-4-2-5-3-6. The second is 1-4-2-3-5-6. The in-line six cylinder engines use: 1-5-3-6-2-4. You should look at the intake manifold to see which ...

6 is good. Run engine. Very bad ticking noise coming from intake. Put tech 2 on it and showing cylinder 6 missfire. Also compression tested all cylinders. Their all at 120. Sounds like you have a flat

...on your engine. 6 cylinders have 6 intake valves and 8 cylinders have 8 valves. They are located inside the engine and allow the air-fuel mixture to enter the cylinder. Why are you looking for

...6 cylinder on engine. On a v-8 the firing order is 1-8-4-3-6-5-7-2. Looking from the front of engine the #1 distributor tower should be looking at the #8 cylinder on engine. Both distributors turn in ...