1986 Mazda 323 "2 tricks" Questions

...disk brakes, the trick is always to rotate the piston as it is retracted. There is always a slot, 2 holes, etc. to make this possible. But it is even easier if you buy a special tool for this.

I HAVE A MAZDA 323 1999 MODEL CAN ANYONE TELL ME HOW TO ADJUST THE HANDBRAKE PLEASE please note it is a 1999 model but it wont let me put that year in your handbreak connects to the rear breaks follow

..., MONITOR RESERVOIR KEEPING IT FULL. STOP WHEN YOU SEE NO MORE AIR BUBBLES. WORKS BETTER WITH 2 PEOPLE BUT ONE PERSON CAN ACHIEVE NO PROB. HOPE THIS

...2: jump cable start engine, s starts now, then the battery is weak ,dead or JUST discharged. the battery must read 12.6vdc rested or its weak. if jumper fails to start car. we then hot wire the ...

on and off and then watch the engine light blink. The blinks are numbers. 1 Blink means number one, 2 blinks mean number 2 then so on. There is a plug underneath your dash by the drivers seat. A parts

...tricks for working in a wall of steel.? the body is steel and the tank is steel. (no xmen about.?) so? what are they. , there are only 2 , besides a monkey with skinny arms. 1: lower front of tank ...

...2 back plugs on the passenger side No real tricks, aside from use a section of hose to help thread the new plug in. It takes small hands and careful patience to do those plugs. Also be CERTAIN that ...

...I tried to put it in drive and then as it went into gear the engine idle down and stalled after 2 to 3 seconds. Tried to start agian but no luck..... First thanks for the ATF trick...car I ...

...2 again. what transmission? in car? see tricks here. (and the hot wire trick) http://www.fixkick.com/nocrank.html#tricks Short answer, Your battery is weak. The clicking noise is the starter solenoid ...

how to find top dead center on the compression stroke of a 1987 toyota 22re there are many ways. (ill assume the damper pulley marks are ok) 1: valve cover off, watch valves #1, all closed at mark is ...