2002 GMC Yukon XL "removed abs fuse put back" Questions

...ABS light came on when I started the car. Drive 20 minutes to destination, turned off motor and can hear the pump running. continues to run. I removed the "fuse" from the electrical box to ...

...remove the positive cable,,unless you remove the negative cable first..When you go back..Put the positive on then put the negative on..You probably spiked the ABS fuse..Try checking the fuses

...abs light came on but fuse is fine. can I drive it for a few miles to get light to go out?all I did was pull fuse and put it right back in and abs light stayed on Remove ur both battery wire and ...

...abs fuse for that time. With abs on you cannot bleed brakes properly. If still having problems then check new brake lines for glitches that might have happened during the install. PS: Don't forget to ...

ABS brake fuse you are disabling other components as well. The ABS fuse supplies voltage to the brake switch that tells the ECM and ABS module the the brake has been applied. If neither of the modules

removed fuses for the abs to c if there was a problem now all these lights stay on there was a vibration when i brake so i changed front rotors but .... still there somone told me to diable the abs to

...fuse for the ABS may not turn off the light anyway. changing transmissions would not result in removing the ABS system, sounds like he has a bad sensor on one of the wheels. put it on a OBD2 reader ...

...fuse out of ABS and brakes worked fine but no ABS. How can I tell which front sensor is bad if thats what it is? Put the fuse back in and take it for a drive in a secluded area. When the anti lock ...

...abs fuse # 10 does in the vehicle my problem with my car is every time im driving and i press the brake it try's to lock up and refuses to let the car stop properly most mechanic has been telling me ...

...fuse backe in and they didn't work again...what could be the problem? The problem is that you burned out the ABS sensors and if they are burned out then they will not work at all. You need to replace ...