...Remove the pressure hose 5/8" nut, and electrical connector if it has one. Disconnect the return hose clamp, and lift out pump. It can be wiggled out from between the intake manifold and fuel rail. ...
...remove the fuel pump cover and unplug the electrical connector and disconnect the wire on top of the fuel pump. disconnect the fuel supply and return hoses from the pump. be careful when trying to ...
...Fuel Line Disconnect Tool Set T90T-9550-S. Remove power steering reservoir filler cap. CAUTION: If using a prying device to assist in water pump removal, be careful not to damage the mating surfaces. ...
...remove the fuel pump Yes. You will have to disconnect and pull out the battery. Than you will either have to syphon gas out or drop tank with gas in it. I recommend using tranny jack to help support ...
...Fuel pump regulator hose (vac) and plugging hose fast. this causes the FPreg to go to high pressure. max. causing RICH> i watch the 02 and see it go rich, if not the 02 is bad or you have exhaust ...
...fuel tank. Remove the 3 bolts. Remove the 3 nuts. Remove the fuel tank support straps (9092). Partially lower the fuel tank. Disconnect the fuel lines from the fuel pump (9350); refer to Section ...
Question about GMC Yukon XL
...Remove the fuel tank filler pipe hoses. Remove the clamps. Disconnect the fuel pump connector. Disconnect the tank connections: Disconnect the fuel lines. For additional information, refer to Section ...
...Remove the fuel filler cap and relieve the residual fuel pressure. For specific details, refer to the relieving fuel pressure coverage in this section. 2. Attach a suitable fuel pressure ...
...fuel. If you have a good key try this it is free Put your key in turn it on dont start wait 10 mins remove key wait 10 seconds repeat this a total of 3 times. If that dont work try a different key do ...
824 questions posted
Usually answered in minutes!
721 Questions
426 Questions
169 Questions
128 Questions
17 Questions
